Skip to content
Coming soon · v3.01

Grebe

A quiet night-session system for several FX pairs, run from one chart.

Grebe trades the calm hours from late evening into the night (server time). On each selected pair it waits for price to stretch away from its short-term average on the M15 chart and takes the trade back towards the middle, only in the direction of the daily trend. If the first trade does not come back straight away, a small recovery basket brings the average price closer. One chart handles up to sixteen pairs; the default set is EURUSD, EURAUD, EURCAD and NZDUSD.

Grebe logo
Market
FX majors and crosses, default EURUSD, EURAUD, EURCAD, NZDUSD
Timeframe
M15 entries, D1 trend filter
Session
Late evening into the night, server time, Monday to Friday
Style
Mean reversion with a small recovery basket per pair
How it trades

How Grebe trades

The idea is simple: in the thin hours after the main sessions close, short pushes away from the average tend to fade. Grebe looks for those pushes, one pair at a time, and keeps each trade small.

  1. 1

    Wait for the night window

    Outside its entry hours Grebe only manages what is already open. It skips the daily rollover minute and does not open new trades at the weekend.

  2. 2

    Spot a stretch on M15

    When price touches the outer edge of a Bollinger band on the M15 chart, Grebe considers a trade back towards the middle band.

  3. 3

    Check the daily trend

    It only buys when the previous daily close sits above its 20-day average, and only sells when it sits below. A stretch against the daily trend is left alone.

  4. 4

    Close at a small target

    A single trade closes at a small profit target, or after some time once price is back at the middle band. If price moves further away first, a few extra legs are added and the whole basket closes together just above its average price.

One basket per pair

Each pair has at most one basket at a time. Baskets on different pairs are independent, so on a busy night several can be open together.

Protection

What keeps it in check

Grebe has no stop on the basket in its default mode. What keeps the risk in check is the structure around it, and the size you choose.

  • Small, capped basket

    The recovery basket has a fixed maximum number of legs with modest lot growth. It does not keep adding without limit.

  • Trend filter

    Trading only with the daily trend avoids the worst situation for a fade: a market that keeps running in one direction all night.

  • Lot per pair matched to depth

    Each pair has its own built-in size factor, measured from its deepest historical dip, so every pair carries roughly the same weight in a bad night.

  • Sizing by equity

    By default the lot follows your equity: 0.01 per 2,500 per pair. Larger balance per 0.01 means smaller positions and shallower dips.

Results

Research results

These figures come from our own research engine, replaying the strategy on real tick data. The single-pair version was checked against the MetaTrader 5 Strategy Tester and matched within 1–3% per year over 2023–2026. A full MT5 test of the multi-pair version is still pending, so treat everything below as research, not as a track record. No per-year chart is shown for the default four-pair set yet; it will follow after the MT5 verification.

Trades per year
~665
Default four pairs together, research engine on real ticks.
Positive years
2021–2026
Every year positive on every tested entry path, for each default pair and for the set as a whole.
Deepest dip aimed for
~12%
Default sizing of 0.01 per 2,500 per pair, measured on the weakest tested path.
MT5 check
Pending
Single-pair version matched MT5 within 1–3% per year; multi-pair run still to come.

What an entry path is

To avoid results that depend on lucky timing, every test was repeated with the entry shifted by up to a few minutes after the signal. The figures above hold on the weakest of those paths, not only the best one.

Why these four pairs

Twelve pairs were tested; seven stayed positive in every year on every path. Out of those, this combination gave the best result per unit of dip and did not weaken in 2024–2026. Pairs that tend to go deep on the same nights were left out of the default.

Research results on historical tick data. Past results, real or simulated, do not guarantee future results. Live trading adds spread changes, slippage and broker differences.

Setup

From download to first trade

Grebe runs on one chart and trades all selected pairs from there.

  1. Step 1

    Use a hedging account

    Grebe needs a hedging account so each pair can hold its own basket of positions.

  2. Step 2

    Attach to one chart

    Open any chart, preferably one of the selected pairs, for example EURUSD on M15. The chart timeframe does not matter for the trading itself.

  3. Step 3

    Check the symbol suffix

    With the suffix setting on auto, Grebe takes the suffix from the chart symbol (for example “EURUSD+” gives “+”). Any pair that does not exist on your account is skipped and reported in the Experts log.

  4. Step 4

    Choose your size

    Keep the default 0.01 per 2,500 per pair, or raise the balance per 0.01 for a calmer ride. Start on a demo account first.

  5. Step 5

    Enable Algo Trading and leave it running

    Grebe trades at night, so a VPS or an always-on computer is strongly recommended. Open baskets stay in place over the weekend.

Position size

With equity sizing, the base lot is 0.01 per 2,500 of equity per pair (EURUSD equivalent). Each pair then applies its own size factor.

EquityBase lot per pairDeepest dip aimed for
2,5000.01~12%
5,0000.02~12%
10,0000.04~12%
25,0000.10~12%

Dip figures are research-engine estimates on the weakest tested path. On small accounts some pairs are rounded up to the broker’s minimum lot, which makes them relatively larger. A higher balance per 0.01 lowers both the dip and the result.

Settings

The inputs that matter

Only the settings a user normally touches are listed here. The engine settings are left at the tested defaults; changing them takes Grebe outside what was researched.

Mode and size

Mode
Basket (default): recovery basket without a stop. SL/TP: each trade gets a fixed stop and target at the broker. In our tests the fixed-stop form did not hold up; it is there for comparison.
Lot size: fixed or from equity
From equity (default) scales the lot with your account. Fixed uses the same base lot every time.
Equity per 0.01 lot per pair
Default 2,500. Higher means smaller trades and shallower dips. With fewer pairs selected, a lower value can be used.
Fixed base lot
Lot of the first leg in fixed mode, EURUSD equivalent. Other pairs are scaled by their size factor.
Risk % per trade (SL/TP mode)
Only used in SL/TP mode: sizes each trade so the stop costs this share of equity. 0 uses the sizing above.

Pairs

Pair checkboxes
One checkbox per pair. EURUSD, EURAUD, EURCAD and NZDUSD are on by default. The other pairs can be switched on, but several of them did not pass our tests and are marked as such.
Symbol suffix
“auto” reads the suffix from the chart symbol. Type it yourself if your account uses a different naming.

General

Magic number
Identifies Grebe’s positions. Change it only if you run a second copy on the same account.
Maximum slippage
In points. The default suits most accounts.
Order comment
Text added to each order, useful for filtering in the history.
Panel and lines on the chart
Shows the status panel and the target, average and next-leg lines. Turning it off does not change the trading.
Panel

Reading the panel

The panel in the top-left corner shows what Grebe is doing on all pairs at a glance.

Grebe · panel
Balance / Equity
Account balance and equity; equity turns red while it is below balance.
Floating (all pairs)
Open result of all Grebe positions together, including swap.
Mode / Base lot
The active mode and the current base lot, with the equity per 0.01 in use.
Pairs
One line per pair: daily trend direction, and either “no basket” or the side, legs, lot and floating result.
This chart’s basket
For the chart symbol: legs and lot, average and target, the next leg and how long the basket has been open. Matching lines are drawn on the chart.
Realised
Closed result of all pairs, today and in total.
Status
ACTIVE while it waits for a band touch, STANDBY outside entry hours, at the weekend, at rollover or when Algo Trading is off.
FAQ

Questions buyers ask

Click a question to open it.

Why does Grebe trade so little during the day?

It only opens trades in the night window. Outside those hours it manages open baskets and waits. In our research, wider windows without careful filtering lost money.

Do I need a chart for every pair?

No. One chart is enough; Grebe checks all selected pairs on a timer. The lines on the chart belong to the chart symbol only.

Can I add more pairs?

Yes, with the checkboxes. More pairs means more trades but also deeper combined dips, so raise the equity per 0.01 when you add pairs. Pairs marked as failed are not recommended.

What happens on a quiet night?

Often nothing, or a single small trade. Grebe earns in small steps; some weeks are flat.

Is the multi-pair version tested in MT5?

The single-pair version is. The four-pair figures come from our research engine on real ticks; the MT5 multi-pair verification is pending, and Grebe will not be released before that is done.

Risks

Good to know

  • No stop in basket mode

    A basket can stay open for a long time and run a deep floating loss, including over a weekend. The only limit is the capped number of legs and your sizing.

  • Correlated nights

    Several pairs share a currency. On a night with a broad move, more baskets can be under water at the same time than the per-pair figures suggest.

  • Small edge, sensitive to costs

    Targets are small, so spread, commission and slippage matter. A wider night spread on your account can noticeably lower the result.

  • Research, not a track record

    All figures are simulated on historical data. Markets change, and a pattern that held in the past can weaken.

Versions

What changed

Current version 3.01, updated 11 October 2026.

  1. v3.0111 October 2026

    New default pair set: EURUSD, EURAUD, EURCAD and NZDUSD, with 0.01 per 2,500 per pair.

  2. v3.0011 October 2026

    Multiple pairs from one chart: a checkbox per pair, automatic symbol suffix, a size factor per pair and a panel line per pair.

  3. v2.1011 October 2026

    Wider night window with a daily trend filter, a retuned basket, sizing by equity and the on-chart panel.

  4. v2.0010 October 2026

    First version: EURUSD night mean reversion with a basket mode and a fixed SL/TP mode.

Grebe logo

Grebe

In final testing. It will appear on our MQL5 page.